E_mail: oversea@csb-ep.com Tel: +86-573-84185528
      www.csb-ep.com
Contact Us

Zhejiang CSB Plastic Bearing
Technology Co.,Ltd

Address: No.6, Fenhu Road, Huimin Sub-district, Jiashan, 
Zhejiang, China

Tel: +86-573-84185528

E-mail: oversea@csb-ep.com

Hot Tags: Plastic BearingsBall BearingsLinear BearingsPlastic ChainSteering BearingsRotary BearingPlastic Rods

Plastic Bearings

EPB7 Plastic Plain Bearings

EPB7 Plastic Plain Bearings

EPB7 Plastic Plain Bearings A material with low friction factor and good wear resistance. The outstanding wear resistance feature of it ensures the applications where the other plastic bearings are not suitable. It is good for both hard and soft shaft. Continuous working temperature: -40?~100?;...

EPB7 Plastic Plain Bearings

A material with low friction factor and good wear resistance. The outstanding wear resistance feature of it ensures the applications where the other plastic bearings are not suitable. It is good for both hard and soft shaft.

Continuous working temperature: -40?~100?;

Good wear resistance with long service life;

Suitable for operation in dusty environment;

No special requirement on the surface roughness;

The Material Data Sheet

Typical Item

Standard

Unit

CSB-EPB7

   Density

ISO1183

g/cm³

1.25

   Color



Cream

   Dynamic friction /steel(dry)



0.09-.020

   Max. PV (dry)


N/mm²×m/s

0.5

   Max. roatating velocity


m/s

1.0

   Max. oscillating velocity


m/s

0.7

   Max. linear velocity


m/s

4.0

   Tensile strength

ISO527

MPa

120

   Compressive strength (Axial)


MPa

60

   E-module

ISO527

MPa

3500

   Max. static pressure of the surface, 20?


MPa

60

  Shore hardness

ISO868

D

77

   Continuous work temperature


-40/100

   Short-time work temperature


-40/180

   Thermal conductivity

ASTME1461

W/m×k

0.2

   Linear coef. of thermal expansion

ASTMD696

K-1×10-5

9

   Moisture absorption RH50/23?

ASTMD570

%

1.3

   Max. water absorption, 23?

   Flammability


UL94

%

6.5

HB

   Volume resistivity

IEC60093

Ocm

>1012

   Surface resistivity

IEC60093

O

>1012

PV Value of Bearings

The max PV value of the CSB-EPB7 series bearing is 0.5N/ mm2*m/s which determines the load capacity of bearing is inversely proportional to the speed. Please refer to the chart for more detailed information (Graph EPB7-1).

The Relation of Load, Speed and Temperature

CSB-EPB7 allows the Max static load of 65Mpa, The max compressive deformation rate under the max load is listed in Graph EPB7-2, The actual load capacity of bearing is slightly less than 65Mpa, The bearing load is variable against the speed and temperature, Fast speed(Vmax: 1.0m/s) results into higher temperature (Tmax: 100?) which decreases the load capacity of the bearing. Please refer to the Graph EPB7-3 for such variation.

The Friction Factor,Wearing and shaft material

Friction Factor 
CSB-EPB7 Bearing Friction factor is not so sensitive to the operation speed (see Graph EPB7-4). The friction factor is considerably decreased along with the loading increasing and it will be turned to be stable when the loading reaches 20Mpa. Graph EPB7-5 shows the friction factor of the bearing is also not sensitive to the shaft roughness but we still recommend that the roughness of the shaft should be neither too smooth nor too rough. It is recommended to keep the roughness of the shaft to be within the range of Ra0.3 to Ra0.6.

CSB-EPB7
Dry
Grease
Oil
Water
Friction coef. µ
0.09~0.20
0.09
0.04
0.04


Wearing and shaft material

Graph EPB7-7 shows that the CSB-EPB7 material is not sensitive with different materials under the rotating operation. It is suitable for hard shaft and high speed steel shaft as well as hard chrome steel shaft. Graph EPB7-8 shows that the hard chrome steel shaft is most suitable for using CSB-EPB7 bearing because the wearing speed is not sensitive when the loading is increased. From the Graph EPB7-8, it shows that CSB-EP7 features different performance.

Chemical Resistance

CSB-EPB7 is good at chemical resistance against weak acidic medium and various kinds of lubricants.

Water Absorbability

The water absorb rate of CSB-EPB7 is 1.3% under the atmospheric pressure while it is 6.5% when the material is immerged into water. The application environment has to be considered because of its water absorb properties.

UV Resistance

The color of CSB-EPB7 could be dimmed when it is exposed into the UV ray. The material performance stays stable.

Bearing Installation

CSB-EPB7 The Interfit Tolerance

Diameter mm

Tolerance after fit E10

Fit Housing H7

Fit Shaft h9

>0~3

+0.014~+0.054

0~+0.010

0~-0.025

>3~6

+0.020~+0.068

0~+0.012

0~-0.030

>6~10

+0.025~+0.083

0~+0.015

0~-0.036

>10~18

+0.032~+0.102

0~+0.018

0~-0.043

>18~30

+0.040~+0.124

0~+0.021

0~-0.052

>30~50

+0.050~+0.150

0~+0.025

0~-0.062

>50~80

+0.060~+0.180

0~+0.030

0~-0.074

>80~120

+0.072~+0.212

0~+0.035

0~-0.087

>120~180

+0.085~+0.245

0~+0.040

0~-0.100

CSB Plastic is one of the leading China epb7 plastic plain bearings manufacturers and suppliers, and also a professional epb7 plastic plain bearings factory and company, we are always at your services.

Hot Tags: epb7 plastic plain bearings, China, manufacturers, suppliers, factory, company
Related Products

Zhejiang CSB Plastic Bearing Technology Co.,Ltd